Jump to content
Sign in to follow this  

m2n68-am plus boot flags

Recommended Posts

my problem is i had mavericks up and running previously but now i cant remember the boot flags for the installer.I do remember using (/amd or /amd64 /amdfx they all worked for me ,npci=0x2000 or npci=0x3000 on other systems using the niresh yosemite zone stick then scrolling down to mavericks has worked when a direct boot from the mavericks installer hasnt sound odd but hackintoshing can be a bit hit and miss and also surprising at times. Attached are the files kexts plists and other files used in snow leopard .yes they still work in mavericks and yosemite yes i know this is a low level board but it does work and it is all i have to work with 

thanks for  any help

my specks (no ahci available for this board)

M2N68-AM PLus

    CPU= am+7750 duel core
    NVIDIA Geforce 7025/nForce 630a
    System Bus
    Up to 2000/1600 MT/s
  2 gig ram 

    Integrated 256 mb
    Supports RGB with max. resolution 1920 x1440 (@75Hz------has only ever been able to use (1024x768x32) on mac
    1 xUltraDMA 133/100
    4 xSATA 3 Gb/s ports Support RAID 0,1,5,10,JBOD
    RTL8211CL Gigabit LAN
    ALC662 High Definition Audio 6-Channel CODEC
    Supports Jack-detect and Multistreaming teconologies
    10 USB 2.0/1.1 ports (6 ports at mid-board, 4 ports at back panel)
    ASUS Unique Features
    ASUS Quiet Thermal Solution
    - ASUS Q-Fan

    - ASUS CrashFree BIOS 3
    - ASUS EZ Flash 2
    - ASUS MyLogo 2
    - ASUS AI NET 2
    Overclocking Features
    SFS (Stepless Frequency Selection)
    HT tuning from 200MHz up to 300MHz at 1MHz increment
    Adjustable CPU Voltage at 0.05V increment
    Memory tuning from 533MHz up to 1066MHz
    PCIe frequency tuning from 100MHz up to 150MHz at 1MHz increment
    Overclocking Protection:
    ASUS C.P.R. (CPU Parameter Recall)
    Back Panel I/O Ports
    1 x VGA
    1 x PS/2 Keyboard
    1 x PS/2 Mouse
    1 x LAN(RJ45) port
    4 x USB 2.0/1.1
    1 x COM port
    6 -Channel Audio I/O
    1 x LPT
    Internal I/O Connectors
    3 x USB connectors (6 ports)
    1 x IDE connector
    4 x SATA connectors
    1 x CPU Fan connector
    1 x S/PDIF Out connector
    1 x Front panel Audio connector
    1 x Internal speaker connector
    1 x CD Audio in connector
    1 x 24-pin ATX Power connector
    1 x 4-pin ATX +12V Power connector
    1 x System Panel connector
    8 Mb Flash ROM AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0 


Share this post

Link to post
Share on other sites

-v -F npci=0x2000 USBLegacy=Off /amd 

this shows progress on yosemite gets to installer screen yay

maverics uses the same i think from memory


Share this post

Link to post
Share on other sites

now stuck at chamealion 

boot with -v npci=0x2000 

last line reads : USBMSC Identifier (non-unique): 000000009451 0x3e3 0x723 0x9451, 2

what to do now ?

im loving all your help 

Share this post

Link to post
Share on other sites

Ok last post on usb only recognises that something  is plugged into the usb port I don't think this is an error

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...