Jump to content
therealduff1

Reboots after i try to boot into installer

Recommended Posts

Hi there !

I am need of some help at the moment , and i also have some questions.I have tried researching the answers to these questions online , but the answers seem to vary from site to site , so i am going to try and post here ! P.S i dont currently own a mac :/ , so i am not able to use unibeast or multibeast

Firstly , here are my specs :

AMD FX 6300

Zotac Nvidia Ge Force GTX 750 Ti

Gigabyte 78LMT-USB3 Motherboard

If there are any other specs i need to tell you , please ask :-)

Question 1: Can running a hackintosh cause hardware damage in any way ?

Question 2:  I have burned niresh distro which has osx 10.8 on to a 4.7gb cd-r , and have attempted to boot the installer . I entered amdfx and -v as a boot flag, and it will print about a screen full of output , With the only errors being No DSDT found, ACPI Table not found, Not an Intel platform:Restart Fix Not Applied. I have attached a photo of my pc just before it restarts.

The last line of output on the screen is Legacy USB Off Done , and then it will pause for a second , and restart my pc. I dont understand what i am doing wrong here ?

Question 3: Am i able to dual boot windows and osx on my pc?

Question 4: Does anyone have links to some kexts which work with the GTX750ti , as i cannot find them anywhere :(

Question 5: What is the latest version of osx my pc supports, as I dont have a clue.

 

Thank you for any help people are able to provide ! , i do greatly appreciate it.

macosx.PNG

Share this post


Link to post
Share on other sites

hey, rememberte this section is for Yosemite version (OSX 10.10) not Mountain Lion (10.8)

Use guide for install Yosemite:

https://www.hackintosh.computer/42/yosemite-zone-guide/

for install use this boot flag.

/amdfx

if dont works try with: 

/amdfx npci=0x2000

and after install, for first boot use:

npci=0x2000

Share this post


Link to post
Share on other sites
On ‎01‎/‎01‎/‎2016‎ ‎08‎:‎00‎:‎08, K3NS4N said:

hey, rememberte this section is for Yosemite version (OSX 10.10) not Mountain Lion (10.8)

Use guide for install Yosemite:

https://www.hackintosh.computer/42/yosemite-zone-guide/

for install use this boot flag.

/amdfx

if dont works try with: 

/amdfx npci=0x2000

and after install, for first boot use:

npci=0x2000

ok i managed to get it to a further stage in the boot progress of the installer. It now stops at pci configuration begin , and then restarts after 15 seconds or so. :-( thank you for your help so far by the way ! :D

Share this post


Link to post
Share on other sites

are you using ahchi?

sometimes this is really important for works.

 

BIOS 2.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community.

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $17.56 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • HI i have this card ATI Radeon HD 5770 Series and I have it working, but I got a problem with vram only have 7 mb I need help to solve this because i have problems with some glitches in the display. I haver clover . PD: My graphics card have 2gb      
    • Hi, I am trying to make bootable USB for Hackintosh , I tried TRANSMAC and Win32disk image from my Windows 10 PC, soon after completion USB not accessible. Please advise.   Thank you,  
    • That's happen every time that i am trying to install a hackintosh on my pc i can't find a solution. I tried a lot of different flags.  Pc specs:  GeForceGTX760 4GB Intel i7-4820K MSI Global X79A-GD65 (8D)   There is a video: https://streamable.com/us6nf  
    • nobody can help me
    • I have a GA-H81M-S mobo with G3240 Pentium (R) processor. I am not using the IGP but an Nvidia GT-710 1GB DDR3 dedicated Graphics card. I followed posts in other forums and managed to install once. After upgrade and reboot, I messed with clover configurator and now I can't get to the install screen. I get stuck on VoodooPS2Mouse: Version starting on OS X Darwin 16.4. If this forum is still alive, please help
  • Download Statistics

    • Files
      855
    • Comments
      2,150
    • Reviews
      2,619

    Latest File
    By Niresh

    230    2

×