Jump to content
ditoto

AMD FX6300 - MSI 970a-g43 - HD5670 - Yosemite 10.10.1

Recommended Posts

AMD FX6300
MSI 970a-g43
Shappire ATI HD5670 1gb ddr3
Frescologic PCIE USB3 card
TPLINK TG3468 (RTL-8168) Pcie gigabit (internal lan broken)

Sound : External BCD3000 (internal not tested)

 

Install Method : Yosemitezone 10.10.1

Bios settings :

Turn off UEFI boot only so it can accept legacy bios / mbr boot
- Windows 8 Function off
- MSI Fastboot & Fastboot off
- Save & Boot

Installation Steps:

1. Make bootable USB Yosemitezone 10.10.1 in mac
2. Boot > Press f11 > Select USB Drive
3. Boot flag : /amd64 -v npci=0x2000 GraphicsEnabler=No
4. Format mac drive with GPT
5. Install with Chameleon boot loader
6. Finish install
7. Boot to new mac install with -x (safemode), it won't boot normally as it would stuck in grey screen + beachball
8. Go through initial setup, no network right now, realtek chip not detected.
9. Boot again in safemode to install FIX and Kext

FIX:
you will need to connect your mac with another method, as the lan not detected yet, i use usb disk with HFS formatted to download everything i need from another computer.

10. For the grey screen + beachball fix follow this guide :
http://www.insanelym...ning-beachball/

11. Realtek Lan : http://www.insanelym...ealtek-rtl8111/ and then use kext-dev-mode=1 or it would not work. Also use npci=0x2000 not 3000, more stable with network adapters.
12. HD5670 resolution fix : open chameleon wizard add GraphicsEnabler=No, Ati Config = Baboon, Ati Ports 3 and Graphic Mode 1920x1080x32 (Full QE/CI, Dual monitor OK)

 

Working out of box :

- USB3 (internal & external card) 1 port only , mouse, keyboard, external sound

- Shutdown, restart

- Appstore (minor fix)

 

Not working:

- Sleep

- Icloud & Imessage (need serial number)

On clover everything works except only in safe mode, when i boot normally got hanging beachball.

 

post-22244-0-57745400-1432809668_thumb.p

Share this post


Link to post
Share on other sites

Hello, I have the same motherboard as you. I can only boot into safe mode using -x npci=0x2000

I only have a windows laptop so how do it use HFS to copy the kext files across?

I don't even understand how to use a kext file, sorry!

All i know is on the hackintosh there is no internet and it wont recognise USB flash disks on FAT32

Please can anyone help, this is driving me crazy for 3 days :(

 

Share this post


Link to post
Share on other sites

Hello, my configuration is:

AMD FX 8350 PROCESSOR

MSI 970A-G43 MOTHERBOARD

2TB WD HDD (WINDOWS 10 INSTALLED)

500 GB SEAGATE (YOSEMITE 10.10.2) 

CORSAIR BALLISTIX 16 GB RAM

ASUS STRIX R7 370 4GB DDR5 GRAPHICS CARD

My problem is that I have installed yosemite on my 500 GB SATA HDD succesfuly & also run for the 1st time. But after that I am unable to boot into Yosemite & no option for choosing between HDDs is coming up in IDE RAID & AHCI MODE. Please help out. 

I was also facing problem in Networks section as it was showing Network error & I was unable to create & set up a connection.

Thank you

 

Share this post


Link to post
Share on other sites
On 28/5/2015 at 0:41 PM, ditoto said:

AMD FX6300
MSI 970a-g43
Shappire ATI HD5670 1gb ddr3
Frescologic PCIE USB3 card
TPLINK TG3468 (RTL-8168) Pcie gigabit (internal lan broken)

Sound : External BCD3000 (internal not tested)

 

Install Method : Yosemitezone 10.10.1

Bios settings :

Turn off UEFI boot only so it can accept legacy bios / mbr boot
- Windows 8 Function off
- MSI Fastboot & Fastboot off
- Save & Boot

Installation Steps:

1. Make bootable USB Yosemitezone 10.10.1 in mac
2. Boot > Press f11 > Select USB Drive
3. Boot flag : /amd64 -v npci=0x2000 GraphicsEnabler=No
4. Format mac drive with GPT
5. Install with Chameleon boot loader
6. Finish install
7. Boot to new mac install with -x (safemode), it won't boot normally as it would stuck in grey screen + beachball
8. Go through initial setup, no network right now, realtek chip not detected.
9. Boot again in safemode to install FIX and Kext

FIX:
you will need to connect your mac with another method, as the lan not detected yet, i use usb disk with HFS formatted to download everything i need from another computer.

10. For the grey screen + beachball fix follow this guide :
http://www.insanelym...ning-beachball/

11. Realtek Lan : http://www.insanelym...ealtek-rtl8111/ and then use kext-dev-mode=1 or it would not work. Also use npci=0x2000 not 3000, more stable with network adapters.
12. HD5670 resolution fix : open chameleon wizard add GraphicsEnabler=No, Ati Config = Baboon, Ati Ports 3 and Graphic Mode 1920x1080x32 (Full QE/CI, Dual monitor OK)

 

Working out of box :

- USB3 (internal & external card) 1 port only , mouse, keyboard, external sound

- Shutdown, restart

- Appstore (minor fix)

 

Not working:

- Sleep

- Icloud & Imessage (need serial number)

On clover everything works except only in safe mode, when i boot normally got hanging beachball.

 

Screen Shot 2015-05-28 at 5.34.43 PM.png

Hi, i have the same configuration, you used a specific image? because I used yosemite zone, though not working before installing Apple logo appears with a hammer and then pops up a ban ... which bios version you have?

Share this post


Link to post
Share on other sites

hi i have the same motherboard and the 8370e amd fx ,i am trying to install mavericks but in the installation the mouse and the keyboard dont work to choose ,any help?thanks alot

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $22.30 of $200.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • I get this message no matter what I do, I've tried changing my SMBIOS to a newer model to no avail. Anyone no how to get the second install boot to work?
    • This is my first time doing Hackintosh. I've several other machines running Mac using UniBeast and Multi beast. I wanted to try Hackintosh Vanilla. So far, no luck. I followed the Guide and MacPwn Mojave Guide. 
    • Hello! I wanted to install MacOS High Sierra, but the SSD does not appear in Disk Manager. I have a Samsung Pro 840 250GB. Is there a Driver for Intel Gigabit 82579LM Network LAN for MacOS High Sierra?
    • This is my very first post and have looked around the forums to my question but I wasn't able to find the exact specifics that I need. This is my very first windows/mac dual boot project. I chose to attempt high sierra and I hope I am posting in the correct area. High Sierra seemed to be the newest that is possibly more stable than Mojave so I chose that. I'm reaching out to the more advanced builders and experienced people. I'm currently running Win 10 as of now and bought a separate SSD to install a macOS on. Before I invest time and energy into this. I'm wanting to get the best recommendations on what OS I should choose , if my hardware will be up for the task and my best plan of attack. I'll be honest I'm not ready to bang my head on the keyboard for hours. I've been there and done that.  My hardware was some of the best at its time in 2011 and I'm not 100% confident it will work with a more up to date macOS I'm also concerned about drivers for my GPU.  All input is welcomed   Here are my current specs:   CPU
          Intel Core i7 2600 @ 3.40GHz    28 °C
          Sandy Bridge 32nm Technology
      RAM
          8.00GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
      Motherboard
          ASUSTeK Computer INC. CG8350 (LGA1155)    26 °C
      Graphics
          NS-24E730A12 (1842x1036@60Hz)
          1023MB NVIDIA GeForce GTX 560 Ti (NVIDIA)    31 °C
      Storage
          3726GB Western Digital WDC WD40EFRX-68N32N0 ATA Device (SATA )    25 °C
          111GB PNY CS900 120GB SSD ATA Device (SATA (SSD))    33 °C
          931GB Seagate ST31000528AS ATA Device (SATA )    30 °C
          3726GB Western Digital WDC WD40EFRX-68N32N0 ATA Device (SATA )    27 °C
      Optical Drives
          HL-DT-ST BD-RE BH12LS35 ATA Device
      Audio
          NVIDIA High Definition Audio 
    • Hi! Everything seems to install ok, but after reboot, it just says Disk Booth Failure Insert system disk and press enter.. Don't have a clue about what can I do!   Francisco
  • Download Statistics

    • Files
      855
    • Comments
      2,148
    • Reviews
      2,612

    Latest File
    By Niresh

    183    2

×