VirtualBox install - doesn't work with Yosemite Zone 10.10.1 - Hackintosh Yosemite - Hackintosh Zone
Jump to content
MacGerman1977

VirtualBox install - doesn't work with Yosemite Zone 10.10.1

Recommended Posts

I am trying to install the very latest Niresh Hackintosh "Yosemite Zone" in VirtualBox. I am using the latest version of VirtualBox from the website.
 
My machine details:
CPU: Intel Core i7-4770K Quad-Core 3.5 GHZ BX80646I74770K
Mobo: Gigabyte Z87 LGA 1150 HDMI (GA-Z87-D3HP)
RAM: 12 GB
HD: SATA, 1 TB Western Digital
Graphics: integrated Intel HD Graphics 4600
Audio: Realtek ALC892 codec High Definition Audio
Monitor: HDMI (LG 32" TV)
OS: Linux Mint 17.1 (64-bit)
 
I have followed these directions perfectly:
 
I'm allocating 4 GB RAM, 1 core CPU, and 16 MB video memory. I have 2D/3D acceleration UNchecked.
I disabled EFI, as directed in the instructions.
 
Which, by the way, WORKED PERFECTLY FOR Mavericks (10.9). Again, I repeat: With the same hardware, the same OS, and the same VirtualBox configuration, I was able to install (Niresh) Mavericks with no problems. So I'm not doing anything fundamentally wrong. If I went through the same steps with a different ISO (e.g., Mavericks) I'd be using Mac OSX 10.9 right now. So whatever is wrong, it's specific to Yosemite Zone ONLY and was not present in Mavericks.
 
Unfortunately, Mavericks 10.9 is too old. Xcode requires 10.9.4 or higher. If I could easily upgrade to 10.9.4 I'd be fine as well! But if I use the App store, it requires arcane knowledge of hackintosh kexts, etc. to get the system working again. I'm a newbie to Hackintosh.
 
I tried the CPU ID fix. I also tried disabling Audio/network. Still hangs at 50%. I've certainly done my best to figure this out on my own (google, reading existing comments, forums, etc.) but nothing works in my case. I've found 2 or 3 threads on here that seem to describe my problem at first glance, and claim to be "solved" -- but I would dispute that, at least in my case.
 
I also tried 2 different ISO images for Niresh Yosemite Zone (10.10 and 10.10.1). The former had a grey apple logo in the middle of the screen, while the latter has the red apple logo with the axe. But they both froze 30-50% of the way through booting off the ISO.
 
Any help would be appreciated!
 
Thanks,
 
Matthew

post-177985-0-91044300-1426020747_thumb.

Share this post


Link to post
Share on other sites

i have the same,i just close virtualbox and restart it go to the install,but stuck at last 2 minutes....

Share this post


Link to post
Share on other sites

Hello,

I have inform at some threads about success with VirtualBox Yosemite.

I am using VirtualBox Yosemite up to 10.10.2.  For installation I follow http://www.macbreake...ith-niresh.html

Some details is impotent from https://www.hackinto...es-left/page-12

For me only stuck at shotdown is a problem.

Good luck

Share this post


Link to post
Share on other sites

Hello,

I have inform at some threads about success with VirtualBox Yosemite.

I am using VirtualBox Yosemite up to 10.10.2.  For installation I follow http://www.macbreake...ith-niresh.html

Some details is impotent from https://www.hackinto...es-left/page-12

For me only stuck at shotdown is a problem.

Good luck

Thank you for you help! i will try it again.

Share this post


Link to post
Share on other sites

When I run with -v, the last phrase I see printed is:

 

VM Swap Subsystem is ON

Share this post


Link to post
Share on other sites

Thank you ran000 , at last i installed the yosemite 10.10.1,and update to 1010.2.

Share this post


Link to post
Share on other sites

Thank you ran000 , at last i installed the yosemite 10.10.1,and update to 1010.2.

Does shutdown work well for you or system hung as I have?

Share this post


Link to post
Share on other sites

I found another torrent, of 10.10.1 that someone installed (a VMDK file) and I tried to boot that -- same problem! It stops halfway.

 

So it seems to be a problem with Virtualbox and/or my computer's hardware.

 

BUT, again, if I use that same version of Virtualbox, and that same hardware to try to run Mavericks, I get no problems.

 

What major change happened in Yosemite that wasn't there in Mavericks? I wouldn't think there would be that much difference.

Share this post


Link to post
Share on other sites

Does shutdown work well for you or system hung as I have?

I just shutdown the virtulbox,and boot into singel model proceed the last step and reboot, then everything seemed ok.

Share this post


Link to post
Share on other sites

Hello,

Please, could you give me some idea which customization you have done for you VirtualBox installation.

 

I just shutdown the virtulbox,and boot into singel model proceed the last step and reboot, then everything seemed ok.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hackintosh Zone Donations

    Hackintosh Zone is a free website with most useful Hackintosh Resources, We try to keep it that way, Your donations and disabling Adblock makes this site going on.



    $8.78 of $200.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Hi guys I've installed Yosemite Zone 10.10.1 on my PC who has the following specs: CPU: FX-8850 GPU: R7 260X MOBO: 990FXAUD3 REV 4.0

      I installed yosemite zone 10.10.1 without any problem and successfully installed the ethernet drivers with the PKG i found in the downloads section of hackintosh zone, I wanted to update to 10.10.5 to install the R7 260X drivers which i can download from the site but now when i enter my bootflags: npci=0x2000 and PCIRootUID=1 and I choose my ssd from chameleon bootloader it boots up and I can see it starts to load stuff when i put -v  but then the screen goes black and the system just reboots. Pls tell me how to fix thanks in advance.
    • Hi DAFFY,   Yes. High Sierra is actually installed on a Z270-F from Asus ROG. Everything's good with it.
    • Dear Community,   First of all I would like to apologise for my horrible English knowledge.   Well, I have one main problem with my hackintosh.   The first and most annoying problem is gIOScreenLockState 3. I've just tried some kexts but still this problem. Now, if I start without -v I just get black screen.   Thanks for reading,   TheXeno      
    • Can anyone specify the best or minimum NVidia GPU for Yosemite OS? Can someone list it? including the best GPU that can be supported with the nvidia web drivers. Does GT730 is supported? I only have DDR3 slot for my motherboard.
    • Thank you for your immediate response :)
  • Download Statistics

    • Files
      852
    • Comments
      2,146
    • Reviews
      2,603

×