Boot Flags for Chameleon (Yosemite Zone) - Hackintosh Yosemite - Hackintosh Zone Boot Flags for Chameleon (Yosemite Zone) Jump to content
TheZeroageTM

Boot Flags for Chameleon (Yosemite Zone)

Recommended Posts

Before I cut to the chase here are my specs:

 

AMD FX 8320

GTX 750 

16GB Ram

1TB WD Blue

1TB WD Black

Asus M5 a97 LE 2.0

400W Thermal Take

 

My question is what boot flags should I use when I'm trying to boot my hackintosh for the first time through chameleon? If I do /amd it says it cant find /amd. The only things that kind of work are npci=0x3000, PCIRootUID=0 and GraphicsEnabler=No. If i use those it boots into some text and then it freezes at [iOBLUETOOTHHCICONTROLLER][sTART] -- completed. 

 

If I try booting in safe mode using -x by itself or with any other flags, it reboots my pc. Does someone know what I should do? Thanks.

Share this post


Link to post
Share on other sites

It looks like graphics problem. Because after bluetooth is pci configuration. I have same graphics card, and after instalation I was booting with - PCIRootUID=1 ahcidisk=1 debug=8 dart=0 npci=0x2000 and nv_disable=1.

 

So try it out. I think that nv_disable=1 can help you to solve this problem.

Share this post


Link to post
Share on other sites

Thanks! That worked. Now how do I install drivers (network and display etc.)? 

Share this post


Link to post
Share on other sites

You're welcome. Network is working for me without problems. So I don't know.
I will send you drivers for gtx in 3 hours, I'm not at home at the moment.

 

EDIT: ok. Install cuda driver first and then web driver.

 

CUDA driver:http://www.nvidia.com/object/macosx-cuda-6.5.32-driver.html

 

WEB driver: http://www.nvidia.com/download/driverResults.aspx/80070/en-us

Share this post


Link to post
Share on other sites

I'm running 10.10. This driver is for 10.10.1. Is there a driver for 10.10?

Share this post


Link to post
Share on other sites

I am trying to install any mac on my pc but I am out of luck Currently I am installing Yosemite in my pc:-

 

Intel E5200 @ 2.5 ghZ 

2 Gb ram ddr3 

Biostar G41D3C 

Intel Graphics Media Accelerator X4500.

 

Every time I am getting stuck somewhere

When I boot without flags it stucks at apple logo

-v 

Stuck at FakeSmcDevice successfully initialised 

-v -f cpus=1

com.apple.AppleFScompression TypedatalessloadSucceded

com.apple.AppleFSCompression TypezlibkmodstartSuccsessfully

tried other bootflug:

​-v  PCIRootUID=1 & 0

-v  -x pci=0x2000 & 0x3000

         GraphicsEnabler= YES & NO

 

all same attached result! ANY EXPER MIND got single clue???? any special BOOT FLUG!!

  • Like 1

Share this post


Link to post
Share on other sites

I'm running 10.10. This driver is for 10.10.1. Is there a driver for 10.10?

http://www.nvidia.com/download/driverResults.aspx/78853/en-us  - 10.10

Share this post


Link to post
Share on other sites

Thanks. Once I install should it automatically resize to my monitor resolution? Because its not doing anything. Or do I need another bootflag. 

Share this post


Link to post
Share on other sites

Ok I found out how to do it, I rebooted with the bootflag nvda_drv=1 but now im just experiencing a black screen when the hackintosh boots. I can see my mouse though.

Share this post


Link to post
Share on other sites

Do you booting without nv_disable=1?

 

try to boot with: nvda_drv=1 npci=0x2000 PCIRootUID=1 -v 

Share this post


Link to post
Share on other sites

Do you booting without nv_disable=1?

 

try to boot with: nvda_drv=1 npci=0x2000 PCIRootUID=1 -v 

I booted with nvda_drv=1 PCIRootUID=0 (Because I have an asus motherboard) npci=0x3000. But I'll try what you posted and I'll post my results.

Share this post


Link to post
Share on other sites

I tried it with those bootflags you told me and I got a white screen then black, then numbers popped up in the corner and disappeared. It would repeat that.

Share this post


Link to post
Share on other sites

I´m out of ideas

Share this post


Link to post
Share on other sites

I´m out of ideas

Well thanks for helping me get started.

Share this post


Link to post
Share on other sites

Hey buddy, 

I know it's been like 2 years but I just startedon't doing this myself. I have an amd 8320 on a gigabyte 78lmt and a gtx 970. Man I was dealing with trouble trying to get this to boot and install for 2 weeks and it's finally installed and booted up. 

The bootflags that I used primarily were /amd npci=3000 PCIRootUID=1 -x -v nv_disable=1 and cpus=1 

It's a mouthfull but it's what got the job done thank god. Now I'm trying to repair Audio and download the graphics.

Share this post


Link to post
Share on other sites

Answer for this question is nv_disable=1

but If you are looking for Yosemite Zone DMG/ISO Installer Bootflags they are listed in the following guide
How to Install Niresh Yosemite on Your PC

Share this post


Link to post
Share on other sites

Hello sir niresh i have laptop lenovo flex 14

4th gen i3 ghz 1.7 intel

4 gb ram

500 hardrive 

I done all but its stuck on same error on iOBLUETOOTHHCICONTROLLER[START]

After this usb stop working and i wait till 40mints but nothing go after it what boot flag i use for this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting July 2018

    Please donate to support the community.
    We appreciate all donations!

    Thanks



    $22.30 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Hi,   I have purchased  Core i3 7100 Processor 16GB Memory 240GB SSD Nvidia GTX730 2GB DDR5 Graphics Cards Asus H110m-cs Motherboard LG 25" HDMI Monitor TPLink 781ND V2 Wifi PCI   Deployed High Sierra  10.13.6 using unibeast and multibeast option, changed bios settings as well and the problems now facing are   1. Display showing as Nvidia Graphics 5MB 2. TPLink unable to install 3. Vodooo install for Audio, but HDMI audio not working, whereas via Audio jack working fine.    Please help me to resolve this issue which is running for more than 1.5 months   Thanks
    • HELLO EVERYONE I HAVE REACH A WALL, IM TRYING TO INSATLL YOSEMITE ON MY PC. I DID EVERYTHING BY THE VIDEO BUT CANT GET PASS THE APPLE LOGO WITH PROGRESS BAR THAT IS NOT MAKING PROGRESS. CAN SOME ONE PLEASE HELP. HERE'S MY SPECS HP DESKTOP PROCESSOR: AMD A4-5000 APU WITH RADEON (TM) HD GRAPHICS: 1.50 Ghz INSTALLED MEMORY: 8:00 GB X64 BASED PROCESSOR
    • I have an old lenovo s10-3 notebook that i want to take to holiday but i simply cannot install it it gets stuck at hfs mounted os x base system on device root than some bluetooth error comes up and no more its been a good 3 days to come this far.   i belive its the gpu kexts becouse it has a Intel GMA 3150 gpu i found the kext for it but i dont know how to run them with the usb installer.   i am trying to install: Niresh Maverick Usb   cpu : intel atom n450 1.66ghz ram : 1gb hdd : 255gb   sata mode is achi boot args are these : atom cpus=1 npci=0x2000 nv_disable=1 dart=0 -f -v -s GraphicsEnabler=No the needed ones are : atom cpus=1  dart=0 -f -v  GraphicsEnabler=No please help i need this notebook working in 3 days  
    • Hey friends, i need the DSDT  for mac OS X MAVERICKS 10.9.5  of my laptop (SAMSUNG R430), i can't find it anywhere. thanks!
    • @svpsl08 Your images don't work and post your specs as text don't share images, Have you tried installing High Sierra?
  • Download Statistics

    • Files
      850
    • Comments
      2,144
    • Reviews
      2,586

    Latest File
    By Niresh

    1060    0

×