Jump to content
alainnoujaim

Did the new Yosemite Zone Distro fix the problem with hp laptops?

Recommended Posts

Did the new Yosemite Zone Distro fix the problem with hp laptops?
Please Help I need to know if i can download the new version.
Last Distro, on hp laptops chameleon wouldn't load and stays stuck at _/ 

and i need chameleon to use the /hp flag. So is it fixed? 

  • Like 1

Share this post


Link to post
Share on other sites

if someone with an hp laptop / insyde bios tried it please report back. 

  • Like 1

Share this post


Link to post
Share on other sites

we tried, still the same.

Share this post


Link to post
Share on other sites

i5 430m hp dv6

amd vision phenom 2 quad core hp dv6

both freeze at spinning "/"

cant even get to the point to type /hp or anything

tried a modded bios on the i5 still freezes at spinning "/" tried to boot clover using 6 just gives me a cpu caller error and freezes

if someone could help id be grateful

Share this post


Link to post
Share on other sites

I had a hard time for a while, followed the guides and made a usb install using TransMac and the Yosemite-Zone 10.10 files and used the boot codes as follows

"Kernel Cache"=/hp -v -x

Used that on an HP Elitebook 8760W.  Still trying to figure out the dsdt things and the .kext files I need, but it boots and works on the ethernet.  Haven't tested too many things yet as I still have a lot of reading to do.

 

Not sure if you got the part about an empty drive.  You have to pick a partition and format it in windows, then in my computer/manage/storage you have to mark the partition as active.  Don't know what else to say, 

 

A better idea of my hardware is :

HP Elitebook 8760W

Computer:      Hewlett-Packard HP EliteBook 8760w (SP247UP#ABA)
CPU:           Intel Core i7-2860QM (Sandy Bridge-MB SV, D2)
               2500 MHz (25.00x100.0) @ 1995 MHz (20.00x99.8)
Motherboard:   Hewlett-Packard 1630
Chipset:       Intel QM67 (Cougar Point) [B2]
Memory:        12288 MBytes @ 665 MHz, 9.0-9-9-24
               - 4096 MB PC10600 DDR3 SDRAM - SK Hynix HMT351S6BFR8C-H9
               - 4096 MB PC12800 DDR3 SDRAM - Samsung M471B5273DH0-CK0
               - 4096 MB PC12800 DDR3 SDRAM - Samsung M471B5273DH0-CK0
Graphics:      AMD FirePro M5950 [HP]
               ATI/AMD Radeon HD 6770M/7670M, 1024 MB GDDR5 SDRAM
Sound:         Intel Cougar Point PCH - High Definition Audio Controller [B2]
Sound:         ATI/AMD Turks/Whistler/Onega/Lombok/Thames - High Definition Audio Controller
Network:       Intel 82579LM (Lewisville) Gigabit Ethernet Controller
Network:       Intel Centrino Advanced-N 6205 AGN 2x2 HMC
OS:            Microsoft Windows 7 Ultimate Build 7600

Share this post


Link to post
Share on other sites

i have tried that but i dont even get to the point on both hp dv6s to be able to type "Kernel Cache"=/hp -v -x goes to boot off usb you see the spinning / then just freezes before getting anywhere i know the usb is ok cuz it boots in my desktop fine

Share this post


Link to post
Share on other sites

i also tried on a asus a55a-sx060s motherboard version k55a it installed great but i have no intel hd4000 graphics and no usb ports any ideas ?

Share this post


Link to post
Share on other sites

The Niresh distro works in my Case, hp elitebook 8560p

without type any options in the install

Share this post


Link to post
Share on other sites

i have tried that but i dont even get to the point on both hp dv6s to be able to type "Kernel Cache"=/hp -v -x goes to boot off usb you see the spinning / then just freezes before getting anywhere i know the usb is ok cuz it boots in my desktop fine

 

I suggest

 

BIOS RESET

Rewrite pendrive (two times) the same pendrive

install without type /HP. (again, without)

wait until finished. if Stop 2 mins.

 

start it again.....

Share this post


Link to post
Share on other sites

I've created a USB drive with Yosemite, and it boots ok in one computer, but in a HP Probook 650 G1, it freezes with the backslash symbol on the left top corner, and I'm not able to input any boot options.

 

I've tried the Unibeast USB drive and the computer reboots silently.

 

Any help please?

Share this post


Link to post
Share on other sites

Maybe it has to do with the fact that the HP Probook 650 G1 doesn't have USB 2.0 ports.  All of the four ports are USB 3.0.  In other laptop, all the USB 3.0 ports aren't recognized.

Share this post


Link to post
Share on other sites

Share this post


Link to post
Share on other sites

Did anyone tried the new distro? it says it fixed the problem with insyde

https://www.hackintoshzone.com/files/file/810-niresh-yosemite//

Share this post


Link to post
Share on other sites

I'm actually downloading it. I'll report back if it works. Btw does anyone knows the difference between /hp and /hp1 ?

Share this post


Link to post
Share on other sites

/hp1 ? where did you saw that?

 

EDIT: saw it, sorry, don' know anything about it. try both

Share this post


Link to post
Share on other sites

It worked, now when i install it in the last seconds i get an error: "an error occurred while running scripts from the packages "GraphicsEnabler.kext"" and if i disable GraphicsEnabler i get Audio.kext and if i disable Audio i get Ethernet.kext.

Same problem anyone?

Share this post


Link to post
Share on other sites

I've tried the new version 10.10.1.

I need to boot it with the flags /hp or /haswell.   /hp1 doesn't work.

Now it boots, but one minute after selecting the partitition, I get this error message:

 

OS X could not be installed on your computer.

Request failed to initialize.

Quit the installer to restart your computer and try again.

 

 

My computer has Linux installed in other partitions.

I've tried other flags like -x, but the same result.

 

I've created a USB drive with Yosemite, and it boots ok in one computer, but in a HP Probook 650 G1, it freezes with the backslash symbol on the left top corner, and I'm not able to input any boot options.

 

I've tried the Unibeast USB drive and the computer reboots silently.

 

Any help please?

Share this post


Link to post
Share on other sites

I've tried in a hard disk with no previous operating system and same result.

 

Maybe I should use some boot flag.

 

I've tried the new version 10.10.1.

I need to boot it with the flags /hp or /haswell.   /hp1 doesn't work.

Now it boots, but one minute after selecting the partitition, I get this error message:

 

OS X could not be installed on your computer.

Request failed to initialize.

Quit the installer to restart your computer and try again.

 

 

My computer has Linux installed in other partitions.

I've tried other flags like -x, but the same result.

Share this post


Link to post
Share on other sites

Did you formatted the partition to Extended (Journaled) ?

Share this post


Link to post
Share on other sites

Has anyone fixed been able to fix:

 

OS X could not be installed on your computer.

Request failed to initialize.

Quit the installer to restart your computer and try again.

 

i7-4710hq

Nvidia 970m

Instaling Yosemite Zone on a 1TB HDD

 

Boot flags -x -f /haswell PCIRootUID=1

  • Like 1

Share this post


Link to post
Share on other sites

Im using a HP pavilion dv6520eo and I completed the installation with the 10.10.1 yosemite zone. Just booting with a usb without any flags and it works fine for me. except the sound, can't lower the volume. But it works!

Share this post


Link to post
Share on other sites

Yeah , i have installed mac os x 10.10 on my hp laptop

 

i used hp kernal to enter the installation screen

 

/hp -x

 

try this flag on the start

Share this post


Link to post
Share on other sites

Hi, I've just installed Yosemite 10 on hp pavilion g6 2141sa using cpus=1 boot flag it works fantastic. Only the problem is my wifi is not working, I've tried many different kext but still not working.

any idea for suitable derivers  ?????

 

Share this post


Link to post
Share on other sites
On 8/23/2016 at 3:27 PM, max1315 said:

Hi, I've just installed Yosemite 10 on hp pavilion g6 2141sa using cpus=1 boot flag it works fantastic. Only the problem is my wifi is not working, I've tried many different kext but still not working.

any idea for suitable derivers  ?????

 

I have the same problem

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community.

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $13.17 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • HI i have this card ATI Radeon HD 5770 Series and I have it working, but I got a problem with vram only have 7 mb I need help to solve this because i have problems with some glitches in the display. I haver clover . PD: My graphics card have 2gb      
    • Hi, I am trying to make bootable USB for Hackintosh , I tried TRANSMAC and Win32disk image from my Windows 10 PC, soon after completion USB not accessible. Please advise.   Thank you,  
    • That's happen every time that i am trying to install a hackintosh on my pc i can't find a solution. I tried a lot of different flags.  Pc specs:  GeForceGTX760 4GB Intel i7-4820K MSI Global X79A-GD65 (8D)   There is a video: https://streamable.com/us6nf  
    • nobody can help me
    • I have a GA-H81M-S mobo with G3240 Pentium (R) processor. I am not using the IGP but an Nvidia GT-710 1GB DDR3 dedicated Graphics card. I followed posts in other forums and managed to install once. After upgrade and reboot, I messed with clover configurator and now I can't get to the install screen. I get stuck on VoodooPS2Mouse: Version starting on OS X Darwin 16.4. If this forum is still alive, please help
  • Download Statistics

    • Files
      855
    • Comments
      2,150
    • Reviews
      2,619

    Latest File
    By Niresh

    230    2

×