no boot instalation

[darksun1988 1]

hello I already possesses a hackintosh mavericks of Niresh for AMD CPU and I would instaler Yosemite on the same core AMD CPU but I instalation blocking the black screen with the small white bar top left

My config:

Motherboard: Asus Sabertooth 990 FX
CPU: AMD FX 8150
Graphics Card: MSI GTX 660 TI

[MaverickShevy 0]

Lots of us with this problem

Try something from here:

https://www.hackintoshzone.com/topic/5110-cant-load-chameleon-boot-loader/page-3

See if it works with clover.

[darksun1988 1]

thank you for your reply but I toujour not manage to launch the same instalation with clover puts me this line (http://imageshack.com/a/img537/2024/ydTZIB.png) before rebooting

[Naganex 1]

what your boot-flags?

I think Niresh give us good guidance for how to install Yosemite to Intel/AMD system.

Most problem is how to know your BIOS configuration and some motherboard use different PCIRootUID option. And also you must know what different between NVDIA and ATI graphic cards.

Basically these boot-flags are using with you boot loader:

 

- Processor type: /amd or /haswell etc

- Graphic card type: use "GraphicsEnabler=Yes" for almost NVDIA card and "GraphicsEnabler=No" for ATI card

- Motherboard= almost all motherboard using "PCIRootUID=0" but for Gigabyte you must use  "PCIRootUID=1"

- you can use verbose mode "-v" for checking installation progress

- always use "ncpi" but for ATI card is using "npci=0x2000" and for NVDIA card using"npci=0x3000"

 

these are 5 element you must use on your boot-flags.

[MaverickShevy 0]

what your boot-flags?

I think Niresh give us good guidance for how to install Yosemite to Intel/AMD system.

Most problem is how to know your BIOS configuration and some motherboard use different PCIRootUID option. And also you must know what different between NVDIA and ATI graphic cards.

Basically these boot-flags are using with you boot loader:

 

- Processor type: /amd or /haswell etc

- Graphic card type: use "GraphicsEnabler=Yes" for almost NVDIA card and "GraphicsEnabler=No" for ATI card

- Motherboard= almost all motherboard using "PCIRootUID=0" but for Gigabyte you must use  "PCIRootUID=1"

- you can use verbose mode "-v" for checking installation progress

- always use "ncpi" but for ATI card is using "npci=0x2000" and for NVDIA card using"npci=0x3000"

 

these are 5 element you must use on your boot-flags.

You don't understand, he can't enter chameleon, so he can't enter boot-flags

 

 

@darksun1988

Do you have the latest Distro? it was updated on 03.12.14

[darksun1988 1]

yes I have the latest distro because I had the first time a download after the 03/12/14 but as his made me think that its already I was the corrupt file so I re-download

[Naganex 1]

You don't understand, he can't enter chameleon, so he can't enter boot-flags

 

 

@darksun1988

Do you have the latest Distro? it was updated on 03.12.14

"instalation blocking the black screen with the small white bar top left"

With this explanation we knows that he's in the middle of installation process, but stuck on that screen that actually is not blank screen. It would be better for him to rerun the installation process with better boot-flags.

[darksun1988 1]

I just follow this (https://www.hackintoshzone.com/topic/5204-fix-for-bootloader-issue/)

and I can start with boots-flags but it blocks here    http://imageshack.com/a/img911/4121/0Dcqgs.jpg

with as boot-flags
/ amdfx NPCI = 0x3000 cpus = 1
or Alor here        http://imageshack.com/a/img909/6104/Olran3.jpg

with as boot-flags
/ amdfx NPCI = 0x3000