Jump to content
Sign in to follow this  
Matt Armes

Selecting kernel after install?

Recommended Posts

Hi, first I wanna say a great thanks for all the work gone into this - its the only version of Yosemite that even boots on my machine! Secondly to my question - I am running this on a Haswell laptop (i7 4710) and as such use the /haswell boot option to load up the installer. This all goes perfectly and the system is installed and loads up the Chameleon bootloader after a restart. This is as far as it gets however. Upon selecting my new install, I simply get the instant reboot as if the Haswell kernel is not being used. I went through all the options in the customization for the install and couldn't see an option to enable the Haswell kernel in the install. I assumed in this case that it might install itself but it doesn't seem like this has happened. If I try to boot using the /haswell boot flag it simply says it cannot find the kernel. Is there something I am missing here? An option I need to select in the installer to get the right kernel installed? It seems as if I'm so close I just need to get the right kernel as literally the only boot flag I used to boot the system was /haswell.

Share this post


Link to post
Share on other sites

@

if possible send me the Installer log and i have seen a lot of people experiencing the same issue

you can fix it manually 

boot into USB with /haswell

now open Terminal

i assume that the name of your volume where Mac installed as"Mac OS"

cp -f /Volumes/"Image Volume"/haswell   /Volumes/"Mac OS"/System/Library/Kernels/kernel
rm -rf  /Volumes/"Mac OS"/System/Library/Caches
kextcache -u  /Volumes/"Mac OS"

Share this post


Link to post
Share on other sites

 

@

if possible send me the Installer log and i have seen a lot of people experiencing the same issue

you can fix it manually 

boot into USB with /haswell

now open Terminal

i assume that the name of your volume where Mac installed as"Mac OS"

cp -f /Volumes/"Image Volume"/haswell   /Volumes/"Mac OS"/System/Library/Kernels/kernel
rm -rf  /Volumes/"Mac OS"/System/Library/Caches
kextcache -u  /Volumes/"Mac OS"

Thanks for the reply. I can confirm this works to boot the system. Whereabouts are the logs stored as I would be happy to upload them?

 

Now I just need to work out a way of getting the graphics (Intel HD 4600 mobile) to work. I don't suppose anyone has had much luck in getting this to work? I know the support was removed by Apple in Yosemite and unfortunately all the information I'm finding on the web either doesn't work - have tried patching the Intel kexts to no avail and the other method I've found unfortunately involves clover which I have had no luck in getting my system to boot with.

  • Like 1

Share this post


Link to post
Share on other sites

@Matt Armes

hey mister did you got the solution for your HD4600????? because right now I just try the solution below and I think it will be good. for the haswell also I put busrastio=20 and cpus=1 and work without the haswell but I will try.

 

 

Hey After do some test I got at start Can't find /System/Library/Kernels/haswell 

 

what I did it was put all the adress /System/Library/Kernels/kernel/haswell 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...