Jump to content
  • 0
Paul Sniper Samaroo

Installed Niresh 10.8.5 Boot Issues

Question

Hey guys; this is my first post, and I just wanted to say thanks very much to Niresh for all his hard work.

 

Now to the problem. (Please note that I have tried the following processes more than once, since I noticed that verbose boot didn't work the first time) I have installed Niresh 10.8.5 dmg to a flash drive using the following guide to the "T" : 

 

The problem I am having is POST installation;

  • [*]I first tried booting in normal mode, and the apple screen with the logo showed up for a few seconds, and then the computer rebooted [*]Then I tried booting in verbose mode to see the problem, and I ended up getting the same error many people are getting (bluetooth drivers issue).  [*] I tried booting in verbose after re-installing, but this time it reached the line that says "system uptime in nanoseconds" and then reboots. 
Please see screenshot 1. [*]So after getting that, I decided to try booting in safe mode, and unfortunately, the boot process got stuck once again. Please see screenshot 2.

 

Thank you very much to anyone who takes the time to read this, and thanks again to Niresh for all his efforts to make installing a Hackintosh much easier for everyone.

 

P.S. I forgot to mention, can someone help me with being able to type in boot flags using the bootloader from Niresh? I know you can press Spacebar and view the different options, but it will be much simpler for me if I can just enter the commands like normal.

 

My relevant system specs:

 

Motherboard : Asus Maximus Formula VI

RAM : Corsair Vengeance Pro 16GB 2133MHz

CPU : Intel Core i7 4770k

PSU : Corsair RM 850

post-5332-0-16698200-1388256721_thumb.jp

post-5332-0-32337300-1388256724_thumb.jp

Share this post


Link to post
Share on other sites

10 answers to this question

Recommended Posts

  • 0

Nevermind, problem fixed. Please take this post down.

Share this post


Link to post
Share on other sites
  • 0

Nevermind, problem fixed. Please take this post down.

Please, tell your fix here

What would you feel if you find a thread were are showing your same error, but the owner solved it and didn't say the answer?

Share this post


Link to post
Share on other sites
  • 0

I knew someone was going to say that lol (funny how I get a response only when I do something unethical :P)...I just went back over the processes to transfer dmg to flash drive and such. Proceeded with install, and almost everything went fine. Now, almost everything is in Russian, eventhough I selected the language to be English. I even changed the language in Terminal using the following line "sudo languagesetup", restarted, and still to no avail. If anyone can help, please see attached screenshot 3.

 

Posted Image

Share this post


Link to post
Share on other sites
  • 0

I knew someone was going to say that lol (funny how I get a response only when I do something unethical :P)...I just went back over the processes to transfer dmg to flash drive and such. Proceeded with install, and almost everything went fine. Now, almost everything is in Russian, eventhough I selected the language to be English. I even changed the language in Terminal using the following line "sudo languagesetup", restarted, and still to no avail. If anyone can help, please see attached screenshot 3.

 

Posted Image

Go to the 5th icon in the first row and post screen

Share this post


Link to post
Share on other sites
  • 0

I ended up doing the same steps I outlined above, and restarted, and everything is back to english. I now need to figure out how to fix this bluetooth issue at boot. I always have to boot in safe mode for the OS to work :( . How do I do this? Can anyone point me to a tutorial on how to fix the bluetooth issue? The bluetooth error is "Missing Bluetooth Controller Transport"

Share this post


Link to post
Share on other sites
  • 0

Thanks deadmau5 for your patience btw :) It's truly appreciated.

 

So I read up online that if the bluetooth issue comes up after "DSMOS has arrived", then it may be a graphics issue. Will update on whether or not that's the case

Share this post


Link to post
Share on other sites
  • 0

Thanks deadmau5 for your patience btw :) It's truly appreciated.

 

So I read up online that if the bluetooth issue comes up after "DSMOS has arrived", then it may be a graphics issue. Will update on whether or not that's the case

It is, actually. The fact that it says Bluetooth doesn't mean that is a bluetooth problem. 

Share this post


Link to post
Share on other sites
  • 0

I can't get to the prompt where you can type in your commands (such as "graphicsenabler = no"). This is because I am not using Chameleon bootloader. I am using the bootloader installed onto the flash drive via BootDisk Utility. When I booted into 10.8.5 via Safe Mode, I tried installing a bootloader using MultiBeast (the one for Mountain Lion), however, I only saw Chimera listed as a bootloader. I went ahead and tried installing Chimera, and when I tried to boot from the HDD (where I installed chimera/Mountain Lion), it isn't recognised, and just goes straight to my other Drive which has Windows 8 on it. 

Share this post


Link to post
Share on other sites
  • 0

Problem solved.

 

When reinstalling, make sure and check the relevant boxes to your graphics card type in "Move Graphics extensions", when clicking the "Customize" button before installing.

  • Like 1

Share this post


Link to post
Share on other sites
  • 0

Hello how you solved you can help me, I have the same problem

MaximusMaximus VI formula

GTX 770 16gb

Gskill 2400

I can not make the bot from the hard drive but only with GraphicsEnablerGraphicsEnabler=NO -x dvd niresh

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $22.30 of $200.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Sierra installed without any issue, but cannot get GT620 to work. Installed Cuda and Webdriver and boots without issues, but home screen wallpaper disappears and screen becomes black. Is this card supported on Sierra?
    • I get this message no matter what I do, I've tried changing my SMBIOS to a newer model to no avail. Anyone no how to get the second install boot to work?
    • This is my first time doing Hackintosh. I've several other machines running Mac using UniBeast and Multi beast. I wanted to try Hackintosh Vanilla. So far, no luck. I followed the Guide and MacPwn Mojave Guide. 
    • Hello! I wanted to install MacOS High Sierra, but the SSD does not appear in Disk Manager. I have a Samsung Pro 840 250GB. Is there a Driver for Intel Gigabit 82579LM Network LAN for MacOS High Sierra?
    • This is my very first post and have looked around the forums to my question but I wasn't able to find the exact specifics that I need. This is my very first windows/mac dual boot project. I chose to attempt high sierra and I hope I am posting in the correct area. High Sierra seemed to be the newest that is possibly more stable than Mojave so I chose that. I'm reaching out to the more advanced builders and experienced people. I'm currently running Win 10 as of now and bought a separate SSD to install a macOS on. Before I invest time and energy into this. I'm wanting to get the best recommendations on what OS I should choose , if my hardware will be up for the task and my best plan of attack. I'll be honest I'm not ready to bang my head on the keyboard for hours. I've been there and done that.  My hardware was some of the best at its time in 2011 and I'm not 100% confident it will work with a more up to date macOS I'm also concerned about drivers for my GPU.  All input is welcomed   Here are my current specs:   CPU
          Intel Core i7 2600 @ 3.40GHz    28 °C
          Sandy Bridge 32nm Technology
      RAM
          8.00GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
      Motherboard
          ASUSTeK Computer INC. CG8350 (LGA1155)    26 °C
      Graphics
          NS-24E730A12 (1842x1036@60Hz)
          1023MB NVIDIA GeForce GTX 560 Ti (NVIDIA)    31 °C
      Storage
          3726GB Western Digital WDC WD40EFRX-68N32N0 ATA Device (SATA )    25 °C
          111GB PNY CS900 120GB SSD ATA Device (SATA (SSD))    33 °C
          931GB Seagate ST31000528AS ATA Device (SATA )    30 °C
          3726GB Western Digital WDC WD40EFRX-68N32N0 ATA Device (SATA )    27 °C
      Optical Drives
          HL-DT-ST BD-RE BH12LS35 ATA Device
      Audio
          NVIDIA High Definition Audio 
  • Download Statistics

    • Files
      855
    • Comments
      2,148
    • Reviews
      2,612

    Latest File
    By Niresh

    185    2

×