Jump to content
leonelvsc

Instant reboot [Haswell] after installation

Recommended Posts

Hi all , i have a problem getting niresh to boot after installation.
 
First of all sry for my english.
 
System specs:
 
CPU: Intel i5 4670k
Mother: Asus Gryphon z87
GPU: GTX 760
 
On the installation ( from the dmg image ) i choose the followig boot options ( xpcm-free npci=0x2000 -v GraphicsEnabler=0)
OS X runs fine but the only way to boot is from the usb where you can choose which partition you want to boot and the boot parameters , everything runs smoothly its detects all of my hardware.
But .. when i unplug my usb and boot from the Chimera bootloader i get an instant reboot, i tried using no parameters and (-v GraphicsEnabler=No npci=0x2000), but i get the same instant reboot
 
Anyone has any idea of what is causing that problem ?
 
Ps: Sry for my english if i'm not clear enought please let me know and i will try to clarify.

Share this post


Link to post
Share on other sites

 

Hi all , i have a problem getting niresh to boot after installation.
 
First of all sry for my english.
 
System specs:
 
CPU: Intel i5 4670k
Mother: Asus Gryphon z87
GPU: GTX 760
 
On the installation ( from the dmg image ) i choose the followig boot options ( xpcm-free npci=0x2000 -v GraphicsEnabler=0)
OS X runs fine but the only way to boot is from the usb where you can choose which partition you want to boot and the boot parameters , everything runs smoothly its detects all of my hardware.
But .. when i unplug my usb and boot from the Chimera bootloader i get an instant reboot, i tried using no parameters and (-v GraphicsEnabler=No npci=0x2000), but i get the same instant reboot
 
Anyone has any idea of what is causing that problem ?
 
Ps: Sry for my english if i'm not clear enought please let me know and i will try to clarify.

 

Same Board with i7-4790 and GTX750 TI, same Problem.

Is your USB-Stick MBR-Format and the Disk GPT?

I think its a bios problem with booting A GPT-Partition, no fix found yet.

Share this post


Link to post
Share on other sites

I found a solution that worked for me.

 

Boot from the usb , once inside OSX ( the one that you have installed ) run multibeast then install the Audio 892 realtek drivers ,etc ,

 

and then on the terminal run

perl -pi -e 's|x74x6c(x48x83xc7x28x90x8bx05..x5ex00x85x47xdc)x74x54(x8bx4fxd8x45x85xc0x74x08x44x39xc1x44x89xc1)x75x44(x0fx32x89xc0x48xc1xe2x20x48x09xc2x48x89x57xf8x48x8bx47xe8x48x85xc0x74x06x48xf7xd0x48x21xc2x48x0bx57xf0x49x89xd1x49xc1xe9x20x89xd0x8bx4fxd8x4cx89xca)(x0fx30x8bx4fxd8x0fx32x89xc0x48xc1xe2x20x48x09xc2x48x89x17x48x83xc7x30xffxce)x75x99(x5dxc3)x90{7}|x74x73${1}x74x5b${2}x75x4b${3}x66x81xf9xe2x00x74x02${4}x75x92${5}|g' mach_kernel

and from windows i used EasyBCD ( for dual boot ) and set the new boot entry

 

IosF3Zk.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...