Jump to content
mohtashimiqbal

booting issues after mavericks installation

Recommended Posts

dear admins , 

 

I have successfully installed niresh mavericks on my system , 

 

the system configuration is , 

intel core i7 3770 
intel DP67DE motherboard 
gtx 550 ti graphics Nvidia 
24 GB ram Kingston 


and this was my experience walkthrough , 


i created a bootable USB , using win32 disk imager . 
restored all BIOS setting to default , 
enabled UEFI boot from bios . 
ACPI was on by default in bios . and apparently windows was running on ACPI . however UEFI was disabled in default settings . 

there was no HPTE option in bios so i couldnt do anything about it , 
i dissconnected my windows hard drive by removing SATA cable . 

and plugged in my USB , 

niresh boot screen came up , 
and i went ahead with the install , created a 200gb partition of the 1 TB HDD .  i left the rest as free space to be picked up by windows if possible . 


the install went fine , the system restarted , but during the innitial setup screen it was always freezing .... 
so i restrated , gave the boot flag -x ( safe mode ) 

it went ahead fine , and i was able to boot without freezing , niresh did all the work after i booted in , KEXT permission prompts kept coming up and i finally saw a messege saying that my system is successfully optimized by niresh . 



i restarted , NIRESH USB is still plugged in , i again get the boot screen , 
and this time i did not gave the boot flag -x .. 

i let it boot normally , 

the boot was successful . 


the mac is working fine and flawlessly , however , no Audio in my system right now , 
and no option i get for a resolution above the standard resolutions ,  1280 x 1024 

____________________________________________________________________________

now i downloaded multibeast ,   and i had no clue what do do with it , installed it randomly , and pooof , 
the system would not boot any more ,  i repeated the whole of the installation ...

and now comes the main problems

1. if i unpluG the niresh USB , it gives no boot screen . and i cannot boot in . 
after booting in , if i remove the USB it works fine , 
but to get an innitial niresh boot menu , i have to plug in the niresh USB every time . 



2. the windows was running previously on ACPI , however , the UEFI was disabled , 
i enabled it to install MAC . 
i remove the USB , disable the UEFI  , (sata controller is still ACPI )
but windows still would not boot .

plus , more over , no way me to boot into mac , if i dont plug in the niresh USB . 

whats interesting here , is the point , that even after disabling UEFI boot from bios , if i plug in the niresh USB . i can still boot into mac with UEFI disabled . without any boot flags .


but i want the solution for these 3 problems . 



1. to be able to boot without plugging in USB every time . 
2. wireless card not working , no Audio works . 
3. i want a dual boot option in my system , how can that be done . 




i have been very precise about every detail , and if you need any more i will be glad to help , it would benefit others as well . so please look into this matter . 

i will come back , with the -v boot flag screen errors .  thank you . 




________________________________________________________________________ 

Share this post


Link to post
Share on other sites

now these are the screen shot of the BIOS , 


if i remove the niresh USB , i do not get the innitial boot menu , instead system givem me boot 0 error .... 
secondly , 
if i connect my windows hard drive with windows installed and previously booting , 
it does not boot , even if i disable UEFI boot . ACPI was on by default . 
no HPTE 64 bit option is available in bios . 


thirdly , i m trying to install multibeast to see if it resolves no Audio issue , and improves the resolution , but i have no clue what options to choose in the multibeast menu ... 

lastly , how should i boot the windows hard drive , its not booting any more ... 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Turn Off ADBlock Extension If you have.
  • Donation Goals

    Hosting 2019

    This FREE website is made possible by your contribution to the community.



    $8.78 of $2,500.00 goal reached.
    Donate Now
  • Forum Statistics

    • Total Topics
      9,656
    • Total Posts
      29,773
  • Donation Goals

    Hosting 2019

    This FREE website is made possible by your contribution to the community.



    $8.78 of $2,500.00 goal reached.
    Donate Now
  • Topics

×
×
  • Create New...