Jump to content
Panos_video

Mavericks 10.9.2 success....?????

Recommended Posts

Well i should rather say 90% Success installing 10.9 Mavericks.

I also updated to 10.9.2 and the installation was ok!
The problem is that the system boots,.... but freezes if i don't boot with -x  and type this command "PCIRootUID=0"
Actually it goes to "Stand by" Mode, while on screen appears a message indicating that the Monitor enters to "Stand By Mode"
As i said this problem can be resolved only when i give the command "PCIRootUID=0"
I have to do this every time i want to boot from Mavericks
Is there any way to install it somehow so that i can access directly the Desktop without giving any commands?
I tried with Multibeast to no avail.
Something else that is weird is that the system may  "freeze" without reason suddenly. It happened once while i was using Maps.

PLease help if you can...i have spent many hours in front of The Monitors testing many different combinations, but i don't know how to do this.

Thank you in advance !!!

Share this post


Link to post
Share on other sites

@Panos_video use the app

to add PCIRootUID=0 to org.chameleon.Boot.plist
you have to find your working kexts for your graphics chipset / card so you can get rid of -x problem

Share this post


Link to post
Share on other sites

Thank you very much.!!!

I found the Extra folder and in the file org.chameleon.Boot.plist i replaced the number to PCIRootUID=0, instead of 1 that previously was, and now i can go to the Desktop without using -x .

 

Thank you very much again.!!!

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $22.30 of $200.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Hello everyone  I have installed High Sierra and updated to 10.13.6 before installing nVidea web drivers. After everything was installed (Kexts and the driver) everything booted fine. Graphics worked perfectly. My onboard USB did not work but I have some generic NEC USB 2.0 card that works fine. After a reboot later in the day, I had a weird kernel panic. It spit out strings no longer than 30 charters and then proceeded to reboot. I have not seen this type of panic . This happened when using the onboard USB 3.0 controller but was fixed by removing the device. But now I'm not sure what caused this. I have reinstalled about 15 times already. Here are my specs: ASUS B150 Plus D3 Intel Pentium G4400 ZOTAC GeForce GTX 1050 2GB WD Blue 500GB HDD 8GB Ram Some generic wireless card (That works) Thanks -T
    • did you know the RX580 sapphire works out of the box to get it to work just let the pc go to sleep and thin wake it up make sure all monitors are hooked  up before you boot up the system. let me know how it works for you. here is the specs of my machine    HP Z800 2 x 3.07 GHz 6-Core Intel Xeon 16 GB 1333 MHz DDR3 Radeon RX 580 8192 MB 2 monitors and a 60 inch samsung uhd tv   thank you all for reading my post I have ben working in apple products for years and hackintosh from the beginning .
    • (MAC & PC) macOS Multi Boot USB Project [KEAL-kealOS’es] – Kemal ALKIN – RAW Image   Support – Apple Macintosh | PC (CLOVER Bootloader/Önyükleyicisi UEFI & Legacy BIOS) – Destekler. SSD NVME & SSD TRIM Desteği / Support : CLOVER | Apple Macintosh (SSD Trim Terminal.app Command: “sudo trimforce enable“) (Kernel & Prelinkedkernel) AMD / Ryzen CPU (İşlemci) | Intel CPU (İşlemci) Native/Doğal Destekler – Support macOS versions/sürümleri: (MBR: Master Boot Record – GPT: Guid Partition Table) Mavericks 10.9.5 – MBR & GPT (AMD/Ryzen + Intel Native) Yosemite 10.10.5 – MBR & GPT (AMD/Ryzen + Intel Native) EL Capitan 10.11.6 – MBR & GPT (AMD/Ryzen + Intel Native) Sierra 10.12.6 – MBR & GPT (AMD/Ryzen + Intel Native) High Sierra 10.3.3 – GPT (Stable AMD/Ryzen + Intel Native) High Sierra 10.13.6 – GPT (AMD/Ryzen Test + Intel Native) Mojave 10.14.1 – GPT (Intel Native)   Needs/Gerekenler: 64GB/64GB+ USB | 7-Zip/WinRAR | Win32DiskImager/Transmac   Download / İndir : GoogleDrive  
    • @Niresh - any chance you can help?
    • salve a tutti  non riesco ad aprire jpg con anteprima di macOS MOJAVE
  • Download Statistics

    • Files
      855
    • Comments
      2,148
    • Reviews
      2,610

    Latest File
    By Niresh

    159    2

×