Jump to content
Vicky Sahu

graphics issue in dell inspiron n5010

Recommended Posts

hey niresh,

i successfully install maericks on my dell inspiron n5010
but problem is that the HD graphics are not loaded,
so the screen or display is not looking good,

plz help me out , how to and which graphics kext i install ????

on installation time i check backup graphics  

Share this post


Link to post
Share on other sites

WHICH PROCESSOR DO YOU HAVE

Share this post


Link to post
Share on other sites

i have intel i3 processor and 

chipset model : intel HD graphics

type : GPU

BUS : Built-In

VRAM(total):64 MB of shared system memory

Share this post


Link to post
Share on other sites

Hey guys i have finally hackintosh my dell inspiron n5010 , if you have problems regarding dell inspiron n5010 i might be able to help i will post the guide soon, and i have worked on intel HD first generation so i might be able to help relating those graphics problems , and also if you have optiplex755 machine with gt220 you are in luck i can guide you through all the procedure i followed , one thing more you inspiron n5010 network card wifi is not supported so else everything is working fine .

Share this post


Link to post
Share on other sites

vicky you should install new osx 10.10.1 Hackintosh zone . and during installation only check the following options in customization tab:

 

IGPEnabler=yes (its for intel HD don't enable "GraphicsEnabler").

ahciinjector(to show internal drives).

SMBios to macbook pro 8,1

only use NullCpuPowerManagement and uncheck the Disabler option which has been checked by default.

uncheck networking and Audio kexts for now you can install it via multibeast post installation so don't worry.

i don't remember the exact option but it would be like " waitforerror" check that it is very important else you will be stuck at loading screen.

 

install . don't use any flags wait 5-10 mins it will load into osx yosemite . the graphics would be lagy so don't worry . use intel HD 1gen 10.10 kext from hackintosh zone , google it you will find it easily, after that use kext wizard or kext utility pre download it somewhere before installation , so that you can easily use after . now extract the intel HD yosemite .zip and there would be some kexts and a folder framebuffer drag all kexts except framebuffer folder onto the kext utility windows , let it install after that open frambuffer -> singlelink-> alternate lw+vga1->appleintelhdfb.kext  drag that and install via kextutility restart and you will have the QE/CI graphics enabled , your dock will be transparent and also , vram would be 288mb which was 3mb . before enjoy ! use universal 0.2 kext for Audio,from multibeast.

 

Share this post


Link to post
Share on other sites

i have same problem 

how to solve that

i m using  os 10.9 in dell n5010

my org.chameleon.Boot.plist file

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
        <key>UseKernelCache</key>
        <string>Yes</string>
</dict>
</plist>
 

Share this post


Link to post
Share on other sites

Thanks you so much Muhammad Danish Iqbal

i am really appreciate with your reply and i will try this in 2-3 days. first i need to download 10.10.1 dmg.

i last question or help i need.

last time when i installing os x i use MBR 
partition scheme but its not working, at installation time in my dell n5010i my laptop forcefully shutdown.

​then i try with GPT partition  scheme. then i successully install.
i want to know that which partition scheme you are using in your n5010i.

thanks again :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $22.30 of $200.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Has anyone managed to run the atheros 9485 run on Mojave? I even managed to make him recognize, but he can not find any network.
    • Hello everyone  I have installed High Sierra and updated to 10.13.6 before installing nVidea web drivers. After everything was installed (Kexts and the driver) everything booted fine. Graphics worked perfectly. My onboard USB did not work but I have some generic NEC USB 2.0 card that works fine. After a reboot later in the day, I had a weird kernel panic. It spit out strings no longer than 30 charters and then proceeded to reboot. I have not seen this type of panic . This happened when using the onboard USB 3.0 controller but was fixed by removing the device. But now I'm not sure what caused this. I have reinstalled about 15 times already. Here are my specs: ASUS B150 Plus D3 Intel Pentium G4400 ZOTAC GeForce GTX 1050 2GB WD Blue 500GB HDD 8GB Ram Some generic wireless card (That works) Thanks -T
    • did you know the RX580 sapphire works out of the box to get it to work just let the pc go to sleep and thin wake it up make sure all monitors are hooked  up before you boot up the system. let me know how it works for you. here is the specs of my machine    HP Z800 2 x 3.07 GHz 6-Core Intel Xeon 16 GB 1333 MHz DDR3 Radeon RX 580 8192 MB 2 monitors and a 60 inch samsung uhd tv   thank you all for reading my post I have ben working in apple products for years and hackintosh from the beginning .
    • (MAC & PC) macOS Multi Boot USB Project [KEAL-kealOS’es] – Kemal ALKIN – RAW Image   Support – Apple Macintosh | PC (CLOVER Bootloader/Önyükleyicisi UEFI & Legacy BIOS) – Destekler. SSD NVME & SSD TRIM Desteği / Support : CLOVER | Apple Macintosh (SSD Trim Terminal.app Command: “sudo trimforce enable“) (Kernel & Prelinkedkernel) AMD / Ryzen CPU (İşlemci) | Intel CPU (İşlemci) Native/Doğal Destekler – Support macOS versions/sürümleri: (MBR: Master Boot Record – GPT: Guid Partition Table) Mavericks 10.9.5 – MBR & GPT (AMD/Ryzen + Intel Native) Yosemite 10.10.5 – MBR & GPT (AMD/Ryzen + Intel Native) EL Capitan 10.11.6 – MBR & GPT (AMD/Ryzen + Intel Native) Sierra 10.12.6 – MBR & GPT (AMD/Ryzen + Intel Native) High Sierra 10.3.3 – GPT (Stable AMD/Ryzen + Intel Native) High Sierra 10.13.6 – GPT (AMD/Ryzen Test + Intel Native) Mojave 10.14.1 – GPT (Intel Native)   Needs/Gerekenler: 64GB/64GB+ USB | 7-Zip/WinRAR | Win32DiskImager/Transmac   Download / İndir : GoogleDrive  
    • @Niresh - any chance you can help?
  • Download Statistics

    • Files
      855
    • Comments
      2,148
    • Reviews
      2,610

    Latest File
    By Niresh

    165    2

×