Jump to content

MacOS could ntot be installed on your computer

Recommended Posts

Gigabyte GA-Z77X-UD5H Intel Z77 4xDDR3 Socket 1155 ATX, F12
Corsair Vengeance Quad DDR3 32GB Kit, 1600MHz, 4x8GB
Intel Core i7-3770K 3.5GHz Socket 1155 Box
Intel HD Graphics 4000

SSD WD Blue 250GB


I have fully operating OSX 10.8.2 (12C60) running on hardware listed abowe. It is completely the same hardware I am trying to install Sierra on.



Configuring UEFI/BIOS as described.
Load Optimized Defaults - OK
If your CPU supports VT-d, disable it - don't see it in BIOS, but manual says it is disabled by default
If your system has CFG-Lock, disable it - don't see it in BIOS nether in manual
If your system has Secure Boot Mode, disable it - don't see it in BIOS nether in manual
Set OS Type to Other OS - don't see it in BIOS nether in manual
If your system has IO SerialPort, disable it - don't see it in BIOS nether in manual
Set XHCI Handoff to Enabled - OK
If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0 - no affect for GA-Z77X-UD5H  



First attempt goes fine to aproximately 11th minute of installation than crash ( https://cl.ly/226adc0e238b ). Reboot manualy with power button.
2nd attempt goes fine to aproximately 11th minute than i get crash repport listed in a "installer log" (that I can not save anywhere). Restar from meny.
3rd attempt goes all the way but "macOS could not be installed on your computer" ( https://cl.ly/894078b9b078 ) ( https://cl.ly/ff472e410b3e )

Using -v on boot was not usefull as it goes to apple screen than to select language and further to instalation progress bar.


Any suggestions?

Share this post

Link to post
Share on other sites

EDIT: I've tryed with some boot flags, -cpus=1 gives "No bless setting for primary boot program was found", if it helps to determine the conflicts with installing sierra on my hardware.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.

    $22.30 of $200.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Has anyone managed to run the atheros 9485 run on Mojave? I even managed to make him recognize, but he can not find any network.
    • Hello everyone  I have installed High Sierra and updated to 10.13.6 before installing nVidea web drivers. After everything was installed (Kexts and the driver) everything booted fine. Graphics worked perfectly. My onboard USB did not work but I have some generic NEC USB 2.0 card that works fine. After a reboot later in the day, I had a weird kernel panic. It spit out strings no longer than 30 charters and then proceeded to reboot. I have not seen this type of panic . This happened when using the onboard USB 3.0 controller but was fixed by removing the device. But now I'm not sure what caused this. I have reinstalled about 15 times already. Here are my specs: ASUS B150 Plus D3 Intel Pentium G4400 ZOTAC GeForce GTX 1050 2GB WD Blue 500GB HDD 8GB Ram Some generic wireless card (That works) Thanks -T
    • did you know the RX580 sapphire works out of the box to get it to work just let the pc go to sleep and thin wake it up make sure all monitors are hooked  up before you boot up the system. let me know how it works for you. here is the specs of my machine    HP Z800 2 x 3.07 GHz 6-Core Intel Xeon 16 GB 1333 MHz DDR3 Radeon RX 580 8192 MB 2 monitors and a 60 inch samsung uhd tv   thank you all for reading my post I have ben working in apple products for years and hackintosh from the beginning .
    • (MAC & PC) macOS Multi Boot USB Project [KEAL-kealOS’es] – Kemal ALKIN – RAW Image   Support – Apple Macintosh | PC (CLOVER Bootloader/Önyükleyicisi UEFI & Legacy BIOS) – Destekler. SSD NVME & SSD TRIM Desteği / Support : CLOVER | Apple Macintosh (SSD Trim Terminal.app Command: “sudo trimforce enable“) (Kernel & Prelinkedkernel) AMD / Ryzen CPU (İşlemci) | Intel CPU (İşlemci) Native/Doğal Destekler – Support macOS versions/sürümleri: (MBR: Master Boot Record – GPT: Guid Partition Table) Mavericks 10.9.5 – MBR & GPT (AMD/Ryzen + Intel Native) Yosemite 10.10.5 – MBR & GPT (AMD/Ryzen + Intel Native) EL Capitan 10.11.6 – MBR & GPT (AMD/Ryzen + Intel Native) Sierra 10.12.6 – MBR & GPT (AMD/Ryzen + Intel Native) High Sierra 10.3.3 – GPT (Stable AMD/Ryzen + Intel Native) High Sierra 10.13.6 – GPT (AMD/Ryzen Test + Intel Native) Mojave 10.14.1 – GPT (Intel Native)   Needs/Gerekenler: 64GB/64GB+ USB | 7-Zip/WinRAR | Win32DiskImager/Transmac   Download / İndir : GoogleDrive  
    • @Niresh - any chance you can help?
  • Download Statistics

    • Files
    • Comments
    • Reviews

    Latest File
    By Niresh

    163    2