Jump to content
tsiki

Can't get into installer

Recommended Posts

Hey people, i have a major issue. Niresh 10.9 can't even get into the installer. I patched my UEFI BIOS and when trying to get into installer i get a black screen and nothing else until i restart. I even tried to boot with -v, i got 10 lines and in 3 seconds a black screen again. Anyone can help?

 

Setup:

Asus p8h61-m pro

Intel i3-2100 3.10Gz

AMD ATI Radeon hd5450

 

Thanks in advance.

Share this post


Link to post
Share on other sites

unplug your graphics card try installation without it 

  • Like 3

Share this post


Link to post
Share on other sites

unplug your graphics card try installation without it 

Thanks mate. That worked. But i want to use my graphics card. Can you please tell me how to do it?

Share this post


Link to post
Share on other sites

Hi again. I've succesfuly installed 10.9 but now i get stuck in first boot (apple logo). I think the problem is my onboard graphics (intel hd graphics 2000). Any suggestions?

Share this post


Link to post
Share on other sites

boot with -v and check where it got stop and report me 

 

for your graphics card after getting Mac working plug that and restart

Share this post


Link to post
Share on other sites

boot with -v and check where it got stop and report me 

 

for your graphics card after getting Mac working plug that and restart

I'm on hdmi. Vga does not even get me through here. I used SBIOS Macmini 5,1 because it's closer to my specs. I've tried many (including the default) but with no luck.

post-17101-0-00383000-1392077059_thumb.j

Share this post


Link to post
Share on other sites

make sure you have checked Nullcpupowermanagement.kext while installing 

Share this post


Link to post
Share on other sites

It is checked by default. Anything else? No luck with that.

Share this post


Link to post
Share on other sites

do one thing fresh install this time make sure you have selected in customize/graphics/move graphics extensions  tick all except your ati or amd section 

Share this post


Link to post
Share on other sites

Ok. Things gone to the worst. My onboard graphics stoped working after the 10.9 installation. I even installed the official bios update but it's not even recognized in bios. Did i just lost my onboard graphics card!?

Share this post


Link to post
Share on other sites

Ok. New data man. I installed 10.9 with my radeon 5450 through hdmi port (on tv). I booted and installed 5450 kexts. Now i can only boot with hdmi. No vga no dvi. Any help?

Share this post


Link to post
Share on other sites

here are some kext wish they will work and some flags you need to use try with differrent combination like 

 

1.use only these flags and try your own and report me back 

 

set GraphicsEnabler = Yes

AtiConfig=Eulemur

 

 

link 

1....https://www.dropbox.com/s/09wj3080ibg7had/ati_mavericks_5450.zip

2....http://www.osx86.net/file/3488-kext-ati-radeon-5450-1gb-per-os-x-1091/

Share this post


Link to post
Share on other sites

Tried every possible combination. No luck. My dvi connected monitor keep saying CHECK CABLE CONNECTION. But my hdmi displays correctly.

Share this post


Link to post
Share on other sites

have tried these kexts https://www.hackintoshzone.com/files/file/50-ati-radeon-hd-5450-for-os-x-109/

 

after installing repair permission and caches and also kernel cache 

Share this post


Link to post
Share on other sites

Thanks for your time but still no luck. Is there anything else i can try? I'm trying on dvi and vga but nothing works. Only hdmi.

Share this post


Link to post
Share on other sites

try to use loadvbios=yes

 

Share this post


Link to post
Share on other sites

I used to have mountain lion working with Intel HD 2000 onboard graphics. Only workable solution was to delete all Intel Graphics kext and use GraphicsEnabler=yes with Chameleon installed

 

then I had to put this into /Extra/org.chameleon.Boot.plist, as this was only way how change resolution to higher - no other combination worked for me, just 1600x1200:

 

<key>Graphics Mode</key>
<string>1600x1200x32</string>

Share this post


Link to post
Share on other sites

Steve cord, I can't use my hd200. I can't even detect it in bios.

Deepak, didn't work man. I'm desperate.

Share this post


Link to post
Share on other sites

downgrade bios?

Share this post


Link to post
Share on other sites

downgrade bios?

Didn't help.

Share this post


Link to post
Share on other sites

try to use loadvbios=yes

I'm going mad here. Do you have any other suggestion?

post-17101-0-74666600-1392323965_thumb.j

Share this post


Link to post
Share on other sites

i think you need to unlock your bios use this link http://biosrepo.wordpress.com/asus/h61/

Share this post


Link to post
Share on other sites

i think you need to unlock your bios use this link http://biosrepo.wordpress.com/asus/h61/

I did that before the installation. I figured it out. All i had to do is to install EVOenabler.kext. That solve my problem.

Thanks anyway for your time.

  • Like 1

Share this post


Link to post
Share on other sites

welcome ,,hah i was just thinking you are not able to get installation screen ...anyways good luck ,,have happy hackintosh :D

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community.

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $40.22 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

  • Download Statistics

    • Files
      856
    • Comments
      2,150
    • Reviews
      2,618

    Latest File
    By Niresh

    113

×