Disable ADBlock Extension If you have.
HD 630 shows 7MB vram - Hackintosh High sierra - Hackintosh Zone Jump to content

Recommended Posts

Hi guys!

I can't work my graphic card, the system says: 7mb vram and everything goes very slowly, neither can to change resolution. I´ve used lilu.kext and inteligraphicsfixup.kext but nothing happens.

Kaby Lake I3

 

Please, I need help

Thanks in advance!

Share this post


Link to post
Share on other sites

Post full specs and 

run this command in terminal post results

	lspci -nn

Share this post


Link to post
Share on other sites

I have the similar problem with my Gigabyte H87N-WIFI mobo and i3-4330 HD4600 graphics. No video acceleration. I tried all the obvious options including installing a 610 nvidia graphics card and same thing. Any ideas?

Share this post


Link to post
Share on other sites
5 hours ago, Niresh said:

Post full specs and 

run this command in terminal post results


	lspci -nn

Of course!

Asus H110M-D, I3 7100, chipset Intel H110, 4GB ram, Intel HD 630, 1920x1080 vga or HDMI, audio ALC887, LAN 8111H, 500GB WD caviar green, High Sierra 10.13 OS

Last login: Thu Dec 28 10:50:32 on console

iMac-de-kruger:~ kruger$ lspci -nn

00:00.0 Class [0600]: Device [8086:590f] (rev 06)

00:02.0 Class [0300]: Device [8086:5912] (rev 04)

00:14.0 Class [0c03]: Device [8086:a12f] (rev 31)

00:16.0 Class [0780]: Device [8086:a13a] (rev 31)

00:17.0 Class [0106]: Device [8086:a102] (rev 31)

00:1c.0 Class [0604]: Device [8086:a114] (rev f1)

00:1c.7 Class [0604]: Device [8086:a117] (rev f1)

00:1d.0 Class [0604]: Device [8086:a118] (rev f1)

00:1f.0 Class [0601]: Device [8086:a143] (rev 31)

00:1f.2 Class [0580]: Device [8086:a121] (rev 31)

00:1f.3 Class [0403]: Device [8086:a170] (rev 31)

00:1f.4 Class [0c05]: Device [8086:a123] (rev 31)

02:00.0 Class [0200]: Device [10ec:8168] (rev 15)

iMac-de-kruger:~ kruger$ 

Thanks for your fast help!!

Share this post


Link to post
Share on other sites

 Upgrade your High Sierra to 10.13.2

Download IntelGraphicsFixup.kext, then place it in Clover/kexts/Other (Lilu.kext is also required), Next reboot into your BIOS, then set IGFX to Primary

this would solve your issue

Share this post


Link to post
Share on other sites
1 hour ago, Niresh said:

 Upgrade your High Sierra to 10.13.2

Download IntelGraphicsFixup.kext, then place it in Clover/kexts/Other (Lilu.kext is also required), Next reboot into your BIOS, then set IGFX to Primary

this would solve your issue

Hi!

I did everything step by step, 10.13.2 installed, kext into correct place and IGFX to Primary in UEFI but no work... Yesterday I installed AppleIntelSKLGraphicsFramebuffer.kext and the system show the correct vram but it was imposible to normally boot, it causes a black screen, only was boot in safe mode. I deleted that kext and it was posible to boot normally but only with 7MB vram again. So, if you had another solution i will do it!!

Thanks a lot!!

Share this post


Link to post
Share on other sites

I have never made a statement about AppleIntelSKLGraphicsFramebuffer.kext

Did you unselect Backup Graphics Kexts, while installing High Sierra

Unselect-Backup-Graphics-Extensions.gif

Share this post


Link to post
Share on other sites
32 minutes ago, Niresh said:

I have never made a statement about AppleIntelSKLGraphicsFramebuffer.kext

Did you unselect Backup Graphics Kexts, while installing High Sierra

Unselect-Backup-Graphics-Extensions.gif

No my friend, when I installed high Sierra I let the box checked... So, do you know if that's the problem? Must I make a fresh installation without this option checked?

Share this post


Link to post
Share on other sites
6 hours ago, Niresh said:

I have never made a statement about AppleIntelSKLGraphicsFramebuffer.kext

Did you unselect Backup Graphics Kexts, while installing High Sierra

Unselect-Backup-Graphics-Extensions.gif

Hi!

I reinstall everything from zero unchecking this box and the result is black screen :(

Share this post


Link to post
Share on other sites

Ok install with that box selected, then reboot 

Download and Install the following kexts

  • FakePCIID.kext
  • FakePCIID_Intel_HD_Graphics.kext
  • Lilu.kext
  • IntelGraphicsFixup.kext

Do not reboot

open terminal and run the following command

sudo grafix replace all

Do not reboot, Download 10.13.2 Combo, Install it, then reboot, this could make graphics work

Share this post


Link to post
Share on other sites
3 hours ago, Niresh said:

Ok install with that box selected, then reboot install Lilu +Intelgraphicsfixup kext (Do not reboot)

open terminal run the following command


sudo grafix replace all

Do not reboot, Download 10.13.2 Combo, Install it, then reboot, this could make graphics work

I did it but the result was no signal in the monitor :( but the hdd still working (I listened it)

Share this post


Link to post
Share on other sites
  • Did you upgrade to 10.13.2?
  • was the upgrade successful?

I have tweaked my answer above in the original post

Share this post


Link to post
Share on other sites
1 hour ago, Niresh said:
  • Did you upgrade to 10.13.2?
  • was the upgrade successful?

Yes, upgrade successful, after that no signal

Share this post


Link to post
Share on other sites
1 hour ago, Niresh said:
  • Did you upgrade to 10.13.2?
  • was the upgrade successful?

Update: no signal while updating, just after do 

sudo grafix replace all

reboot and while the update was installing becomes in "no signal"

Share this post


Link to post
Share on other sites

If you get the Black Screen or No Signal, reboot in single user mode (Bootflag -s)

then run the following commands one by one

mount -uw /
grafix backup all
reboot

This would make your system boot in VESA Graphics

I assume that you are on 10.13.2 with Lilu and nVidiaGraphicsFixUp Installed,

Download and Install the following kexts

  • FakePCIID.kext
  • FakePCIID_Intel_HD_Graphics.kext

then again open the terminal

	sudo grafix replace all

https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads/RehabMan-FakePCIID-2017-1215.zip

I have read on a forum that Configuring the following values in Clover Config.plist may tweak your Graphics, Use Clover Configurator to Configure, Keep me posted

  • Set SMBIOS as iMac 18,3
  • In ACPI, List of Patches select "Change GFX0 to iGPU"
  • Add the following to existing boot flags
    -disablegfxfirmware -shikigva
  • Install IntelGraphicFixup, Shiki & Lilu Kexts
  • Set Fake ID Intel: 0x59128086
  • Set Graphic: Inject Intel ig-platform: 0x59120000

 

Share this post


Link to post
Share on other sites
2 hours ago, Niresh said:

If you get the Black Screen or No Signal, reboot in single user mode (Bootflag -s)

then run the following commands one by one


mount -uw /
grafix backup all
reboot

This would make your system boot in VESA Graphics

I assume that you are on 10.13.2 with Lilu and nVidiaGraphicsFixUp Installed,

Download and Install the following kexts

  • FakePCIID.kext
  • FakePCIID_Intel_HD_Graphics.kext

then again open the terminal


	sudo grafix replace all

https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads/RehabMan-FakePCIID-2017-1215.zip

I have read on a forum that Configuring the following values in Clover Config.plist may tweak your Graphics, Use Clover Configurator to Configure, Keep me posted

  • Set SMBIOS as iMac 18,3
  • In ACPI, List of Patches select "Change GFX0 to iGPU"
  • Add the following to existing boot flags
    
    -disablegfxfirmware -shikigva
  • Install IntelGraphicFixup, Shiki & Lilu Kexts
  • Set Fake ID Intel: 0x59128086
  • Set Graphic: Inject Intel ig-platform: 0x59120000

 

Done, step by step, I still having 7 mb ram. I don't know what's happen with my system... 

Share this post


Link to post
Share on other sites

Edit plist within  FakePCIID_Intel_HD_Graphics.kext, try to add your device ID which is 0x59128086 in the appropriate location

Share this post


Link to post
Share on other sites
3 hours ago, Niresh said:

Edit plist within  FakePCIID_Intel_HD_Graphics.kext, try to add your device ID which is 0x59128086 in the appropriate location

Do you mean edit in clover? Or edit with text editor?

Share this post


Link to post
Share on other sites

With Text Editor,

BBEdit is preferred

Share this post


Link to post
Share on other sites
1 hour ago, Niresh said:

With Text Editor,

BBEdit is preferred

I think I putted on the right place, no changes, same issue...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community.

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $22.66 of $100.00 goal reached.
    Donate Now
  • Forum Statistics

    • Total Topics
      9,584
    • Total Posts
      29,544
  • Contribute

    This is a free website, We'll try to keep it that way, Your donations and disabling Adblock makes this site going on, Thanks for understanding.



    $22.66 of $100.00 goal reached.
    Donate Now
  • Topics

×